Remote IED Wire Cutter
Remote IED Wire Cutter, bomb wire Cutter, explosive equipment
cutter.
Introduction:
The Remotely Operated Wire Cutter is a lightweight tool designed to
remotely cut command wires or wires within an lED circuit (by
suitable trained EOD operators) at the standard safety distances.
The RIWC is ideal for use in the light scales or assault IED roles and by
suitably trained High Threat Search Teams.
Safety notes
• A safe stand-off distance should always be observed when using
the RIWC.
• Command wires should never be cut by hand
• Cutting a wire may initiate a device in close proximity to the
intended cut point.
Specifications:
• Weight: Cutter only 553g (19.5oz)
•Dimensions: 270mm long (armed), 220mm long (unarmed), 40mm
diameter(10.6” armed, 8.6” unarmed, 1.6” diameter)
• Construction: Non-conductive chemical resistant casing and blades
• Colour: Black
Features:
• Silent operation
• Manual spring-wound firing mechanism
• Trigger weight of 786g (28oz)
• Ceramic blades cut a 14mm section out of the wire, preventing any
possible short-circuit activating the IED
• Remaining wire is released
• Cuts multi-stranded copper core wire up to 7mm diameter
• Blades are easily replaced in minutes
• Non-conductive chemical resistant mechanism and housing
• Sealed mechanism to prevent ingress of sand and dust
• Double safety mechanism to prevent misfire
• Tether points anchor the cutter and prevent any more pull back,
when blades slice through the wire
Components
• Wire cutter
• 50m high performance pulling line and karabiner
• Threaded ground anchors
Company Introduction
In 2008, Beijing Hewei Yongtai Technology Co., LTD was established
in Beijing.Focus on the development and operation of special safety
equipment, mainly serve the public security law, armed police,
military, customs and other national security departments.
In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was
established in Guannan.Covering an area of 9000 square meters of
workshop and office building, it aims to build a first-class
special safety equipment research and development base in China.
In 2015, a military-police Reserch and development center was set
up in Shenzhen.Focus on the development of special safety
equipment, has developed more than 200 kinds of professional safety
equipment.
Jiangsu Factory
Shenzhen Research Centre
Overseas Exhibitions
Certificates
Staff Photo
Staff from Jiangsu Factory
Staff from Headquarters
Staff from Shenzhen research centre
