Portable Full Frequency Range Radio Frequency Jamming System for
Bomb Disposal
Introduction
The Bomb Jammer ™ series of IED Jammers are designed to saturate an
area with electromagnetic
energy in order to neutralize an IED that is activated by remote
control on command. Our IED Jammers
work by preventing radio signals from reaching the radio trigger
used to detonate that IED.
Because the IED Jammer can broadcast RF Jamming interference on
multiple frequencies
simultaneously, all known threats can be addressed. The Bomb Jammer
™ in its trunk mounted form
as well as the roof mounted version were not designed to detonate
IED weapons. The sole purpose of
an IED Jammer is to jam only. RCIED or Radio Controlled Improvised
Explosive Device weapons are
on command bombs that require a trigger by radio control, and as
such, are almost always designed to
detonate with some basic radio frequency coding. This coding
prevents accidental activation by random
radio frequencies it might receive.
The IED Jammer series are designed to jam using electromagnetic
energy and not detonate a remote
controlled IED or RCIED.
Users of our IED Jammers, Communication Jammers, and RF Jammers
range from mine clearance
teams, military forces, border patrol, bomb detection teams, VIP
security forces, Law Enforcement
Agencies, EOD technicians, Government Contractors, and Government
Agencies.
Function
This Jamming equipment is specially design to against electronic
warfare. The system interfere the
wireless remote control device, mobile phones or other wireless
devices signals, interrupt wireless
remote control explosive device so that it cannot be activate, etc.
Mainly used for EOD specialist
personnel when transfer or disposal of suspicious explosive
articles, or to protect important figures,
special stadium venues, private meetings, etc. It is the necessary
equipment for the EOD, SWAT and
CAT special commando when operating IED disposal missions. It is
also the crucial equipment when
radio signal interference required in a special event.
Specifications
1. Frequency Bandwidth, Power output and jamming target:
Frequency Band | Power Output | Antenna | Jamming Target
|
20-80 MHz | 50 W | A:Whip Antenna | Remote control Toy |
80-300 MHz | 30 W | B: Whip Antenna Industrial | civil remote control |
300-520MHz | 50 W | C:YAGI Directional Antenna
| Industrial, civil remote control, 350MhzTETRA walkie-talkie |
800-1000MHz | 50 W | D:YAGI Directional Antenna | 850Mhz Digital Walkie-Talkie, CDMA800MHz |
1000-2000MHZ | 50 W | E:YAGI Directional Antenna | CPS,Satellite Phone,DCS1800 |
2000-2500MHz | 50 W | F,G:YAGI Directional Antenna | W-CDMA,CDMA2000,WIFI |
2. System operation: Remote control handles
3. Power Output: 230W
4. Power Consumption: MAX 1150W
5. Power compatible: AC220V / DC26-28V
6. Battery comply with GJB157A standards
7. DC Current input: 40Amps@28VDC
8. Operation time: unrestricted (~ Hours) Internal battery can
support the system continuously working
for 70-80 minutes.
9. Reliability and serviceability requirements: MTBF≥1000
Hours,MTTR≤1 Hours.
10. Jamming method: Frequency band Blocking, sweep
11. Operation methods: sweep, toiletry spectrum and direct sequence
spread spectrum in combination
12. Operation modes: full band mode of operation to meet the
situation requirements.
13. System protection: RF output no-load and short-circuit
protection; internal power system has overload and short-circuit
protection, etc.
14. Main Unit Weight: 40Kg
15. Main Unit Dimensions: (Pelican Case): 724 x 441 x 267mm.
Company Introduction
In 2008, Beijing Hewei Yongtai Technology Co., LTD was established
in Beijing.Focus on the development and operation of special safety
equipment, mainly serve the public security law, armed police,
military, customs and other national security departments.
In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was
established in Guannan.Covering an area of 9000 square meters of
workshop and office building, it aims to build a first-class
special safety equipment research and development base in China.
In 2015, a military-police Reserch and development center was set
up in Shenzhen.Focus on the development of special safety
equipment, has developed more than 200 kinds of professional safety
equipment.
Jiangsu Factory
Shenzhen Research Centre
Overseas Exhibitions
Certificates
Staff Photo
Staff from Jiangsu Factory
Staff from Headquarters
Staff from Shenzhen research centre
